Jiangsu Koofilm Technology Co., Ltd.
Jiangsu Koofilm Technology Co., Ltd.
Add to Cart
Feature Details
Material Multi-layer nano-ceramic particles + PVC base
Thickness 2.0 Mil
Heat Rejection 94% IR rejection
UV Protection 99% UV
VLT (%) 76%
Warranty Lifetime against bubbling, peeling, and discoloration
Installation DIY-friendly (static cling) or professional-grade adhesive options
✔ 76% VLT – Nearly invisible protection with high clarity.
✔ 99% UV Rejection – Prevents paint fading and interior damage.
✔ 94% IR Rejection – Reduces heat buildup for a cooler cabin.
✔ Nano-Ceramic Coating – Enhances scratch resistance and durability.
✔ Self-Healing Properties – Minor scratches disappear with heat.
✔ Hydrophobic & Oleophobic – Repels water, dirt, and oil for easy cleaning.
✔ Glossy Finish – Maintains the original shine of your car’s paint.
✔ Tear-Resistant & Flexible – Easy installation on complex curves.
1. Ensure surfaces are dry, smooth, and free of scratches, Use clean microfiber cloths to avoid lint or dust. Wipe thoroughiy to prevent rust spots.
2.Replace edge films for larger panels if necessary
Squeegee Selection
1. Use a hard plastic-edged squeegee wrapped with soft felt or a soft-tip squeegee.
2. pray soapy vater on the film adhesive to reduce friction, minimize bubbles, and avoid damaging the self-healing layer.
Bubble Removal
1. Work from the center outward with the squeegee to remove air bubbles.
2. Avoid leaving gaps, as trapped air may cause adhesive marks. Use a mist of water and soap for large surfaces ike ahood if you have difficulty to instal
Front/Rear Bumper Installation
1. Two technicians are requiredt one to stretch horizontally, the other to secure vertically.
2. Ensure the fim does not exceed 1.5x the original bumper length to prevent peeling or overheating (risk of "bursting”).
Narrow Areas (A-Pillars)
1. Select appropriately sized film for narrow sections.
2.Avoic overlapping seams to prevent adhesive marks.
Edge Trimming
1. Trim edges neatly, Use a heat gun to soften the film, then press edges into seams with a hard plastic roller
2. Heat edges thoroughly with the heat gun and apply firm pressure to seal.
No signal interference (unlike metallic tints).
Better heat rejection than dyed or carbon films.
No purple fading (common in cheap dyed films).
Sleek, professional appearance with no reflective glare.
Clean the glass thoroughly (remove dust, grease, and old tint residue).
Cut the film to size (leave a small margin for trimming).
Apply soapy water to the glass for easy positioning.
Squeegee out air bubbles from the center outward.
Trim edges for a perfect fit. Let it cure for 2-3 days (avoid rolling down windows during this period).
Standard Packaging:
1.52m x 30m rolls
Custom sizes available
Shipping:
7-15 days delivery worldwide